Printable Layer Disc
Printable Layer Disc
Check out this page if you are searching for Printable Layer Disc
 |
 200 White Inkjet Printable DVDR DL Dual Double Layer Blank Disc Storage Media  US $99.99
|
 25 White Inkjet HUB Printable DVDR Dual Double Layer DL Disc with Cake Box US $19.69
|
 50 8X White Inkjet Printable DVDR DL Double Layer Recordable Disc Media 85GB US $31.88
|
 10 Blu ray 6x BD R White Inkjet Printable Dual Layer DL Blank Media Discs 50GB US $56.95
|
 200 DVDR Dual Layer White Inkjet HUB Printable DL Disc US $99.97
|
 50 Verbatim 96862 DVDR Dual Layer DL 8X White Inkjet Printable Media Discs US $69.95
|
 100 White Inkjet Printable DVDR DL Dual Double Layer Blank Disc Storage Media US $56.99
|
 50 DVDR Dual Double Layer White Inkjet HUB Printable DL Disc US $31.77
|
 backup VERBATIM DVD R DL 85GB 8X DUAL LAYER DISC Printable 25 pack Spindle mkm US $49.95
|
 50 Philips 8X White Inkjet Printable DVDR Dual Layer DL Disc Media in Cake Box US $36.99
|
 10 8X White Inkjet Printable DVDR DL Double Layer Disc US $10.98
|
 200 White Inkjet HUB Printable DVDR Dual Layer DL Disc with Cake Box US $99.69
|
 50 White Inkjet HUB Printable DVDR Dual Double Layer DL Disc with Cake Box US $32.69
|
 100 White Inkjet HUB Printable DVDR Dual Layer Disc with Cake Box US $56.69
|
 100 White Inkjet HUB Printable DVDR Dual Layer DL Disc US $56.69
|
 100 DVDR DL Printable Double Layer Disc for LG Burner US $56.99
|
 1 Verbatim 3D blu ray disc 50GB bd r dl dvd dual layer blu ray 4X printable US $7.99
|
 10 TDK 3d blu ray disc 50GB bd r dl printable blu ray double layer dvd sealed US $49.90
|
 10 discs Blank Printable DVDR DL 8x Dual Layer 85GB D9 US $11.69
|
 NEW 100GB Sony Triple layer BDXL BluRay Printable Disc BD R Original FROM Japan US $69.00
|
 25 White Inkjet HUB Printable DVDR Dual Layer DL Disc US $19.69
|
 25 8X White Inkjet Printable DVDR DL Double Layer Recordable Disc Media 85GB US $19.88
|
 100 Philips Inkjet Printable DVDR Dual Layer DL Disc US $66.99
|
 100 DVDR White Inkjet HUB Printable DL Dual Layer Disc US $56.77
|
 100 GB Sony BD R BDXL blu ray triple layer blueray printable disc Japan Genuine US $65.95
|
 25 discs Blank Printable DVDR DL 8x Dual Layer 85GB D9 US $23.90
|
 25 Philips Inkjet Printable 8x DVDR DL Dual Layer Disc US $25.90
|
 100 8X White Inkjet Printable DVDR Double Layer Recordable Disc Media 85GB US $56.88
|
 50 Philips Inkjet Printable DVDR Double Layer DL Disc 85GB with Cake Box US $36.99
|
 100 GB TDK BD R BDXL blu ray triple layer blueray printable disc Japan Genuine US $67.00
|
 Tdk 49026 Disc Blu ray Single Layer 25gb Write Once 4x Thermal Wht Hub Printable US $68.25
|
 Verbatim Blu ray Dual Layer BD R DL Inkjet Printable Disc 97334 US $251.06
|
 10 White Inkjet Printable 8x DVDR DL Double Layer Disc US $10.95
|
 50 White Inkjet HUB Printable DVDR Dual Layer DL Disc US $31.69
|
 300 Printable DVDR 8x Dual Layer Disc for LiteOn Drive US $143.99
|
 300 DVDR 8x Printable Double Layer Disc for LG Burner US $143.99
|
 200 DVDR DL Printable Double Layer Disc for LG Burner US $99.99
|
 10 White Inkjet HUB Printable DVDR Dual Double Layer DL Disc Media Paper Sleeve US $10.69
|
 5 White Inkjet HUB Printable DVDR Dual Double Layer DL Disc Media paper Sleeve US $6.69
|
 25 Philips Inkjet HUB Printable DVDR Dual Double Layer DL Disc Media US $21.69
|
Diy Rapid Prototype Techniques
Several DIY Rapid Prototyping techniques have come up off late. Making a 3D printer at home can prove to be quite cost-effective. The other names for such sort of prototyping are fabbing, three-dimensional printing, reprapping, and fabrication. RepRap is one such 3D printer. Let its making be studied in detail.
RepRap: RepRap is the abbreviation for Replicating Rapid-prototype. In other words, it can be said to be a Practical Self-copying Printer. RepRap would make metal, ceramic, and plastic parts. It’s itself made up of plastic. This is done in order to facilitate the making of multiple copies of its own self. The final product can be described as a 3-axis robot moving numerous material extruders. Fine filaments are produced by these extruders. The filaments are made up of their own working materials. This process has a paste-like consistency.
If one intends making plastic cones, RepRap would make use of the plastic extruder for laying down a 0.5 mm quickly hardening filament made from molten plastic for drawing the filled-in disc. The Plastic Intrusion Head would then be raised and the layer following that would be drawn, exactly on the top of 1st. This process keeps on repeating till the complete cone is formed. If making an Inverted Cone is on the agenda, the same procedure is followed. The only difference would be laying down the support material beneath the parts that are overhanging. The removal of support would take place after the completion of cone. Intermixture of conductors with plastic is allowed. This can help in the formation of circuits.
The process described above is known as Fused Deposition Modeling. These machines, though useful, are not very much prevalent. The software of the above process is believed to work on all the computer platforms, that too, free of cost.
Fabr: The Fabr makes use of parts which are commonly available. The other advantages include requirement of minimal fabrication of parts, high accuracy and availability of enough power for not only plastic, but also wood or metal.
The key components of Fabr include 80X20 extruded aluminium, fasteners and bars, drive and anti-backlash nuts, couplers, bearings, aluminium bars, screws, pulleys, timing belts, and ‘A Custom Stepper Motor Controller Board’. The learners are advised to use an Allegro 3967 Micro stepping Stepper Motor Controller. The board contains three drivers, and connectors to have end stops.
DIY 3D printer made from pure sugar: The objectives behind making the above-stated DIY 3D printer are cost-effective design using recycled components, huge printable volume emphasizing over better resolution, and ability of using low-cost print media inclusive of granulated sugar. The process of printing starts with the bed of granular print media which has low melting point. The printing media is fused selectively with a directed, narrow, low-velocity beam. This beam consists of hot air. The bed is then lowered by a diminutive amount. The bed’s top portion is then bombarded with a flat thin layer (of media). By this process, a 2D object is formed. If this process is repeated, 3D object is formed.
Go to Prototype Zone to get your free ebook on Prototyping at Prototyping. Prototype Zone also has Rapid Prototyping Forum, 3D Printer Blog and other information on Prototype Information and daily news.
About the Author
longxiang-ltd.com is The TOP 1 Plastic mould store,we sell rapid prototypes,you can buy Safe Plastic mold and Rapid prototype from us.